Welcome to the home of...
In-door lock protection
Jimmi' Jammer®
|
|---|
Jimmi' Jammer for
Ford F-150 trucks 2004 - 2014 is discontinued. |
The photo to the right shows one popular method of breaking into your 2004-14 F150 (all trim packages and models including Raptor) or Lincoln Mark LT. The thief pry's into the door under the handle to get at the lock rods inside the door. Then, they force the rod to move and unlock the door! It's fast, easy and quiet, making this a favorite among thieves. > Another popular method is to "Punch" the lock straight into the door cavity. This is also very easy to do since the handle and lock holder are all made of plastic! What's the solution? Read on... |
 |
||
|---|---|---|---|
 |
< The photo to the left shows a Jimmi' Jammer® plate mounted to the back side of the drivers door handle. The plate covers the back of the lock cylinder, (toward the left of the photo,) reinforcing the plastic holding the lock in place and blocking access to the lock rods inside the door. (Lock rods are not shown here for clarity.) The left end of the plate uses a set screw to anchor the left end to the door jamb, increasing the strength of the assembly. The lower left part of the plate is relieved on this model to allow for the mounting of the keyless lock pad cable channel to the door. (not shown.) Mounting the plate inside the door also helps prevent the thief from pulling the entire handle away from the body far enough to stick a tool into the door cavity and get at the lock rods, another favorite way to break in to your truck. |
||
|
Scroll down to see a list of models
|
||
|
The plate wraps around the lock cylinder holder, then the circular clamp helps reinforce the plastic lock holder and provide additional support behind the plate. You can see here that the plate uses the factory handle mounting stud and nut, so no cutting or drilling is required. The Jimmi' Jammer® for your tailgate handle will not interfere with backup cameras mounted on the handle. |
All Jimmi' Jammers for 2004 - 14 Ford F-150 (all models incl. Raptor) or Lincoln Mark LT,
are discontinued. Sorry.
Part Number - 113400 if you have keyless entry on your drivers door and no lock cylinder on the passenger door. |
|
|---|---|
Choose one of these 3 kits for your front doors |
Part Number - 113450 if you do not have a keyless entry pad on the drivers door and have a lock cylinder on each front door. Sorry, discontinued model. |
Part Number - 113451 if you do not have a keyless entry pad on the drivers door and do not have a lock cylinder on the passenger door. |
|
Get this for your rear 2 doors |
Part Number - 113470 will fit the rear two doors
on 4-door trucks that use any of the kits listed above. Sorry. PN 113470 has been discontinued. |
Get this for your tailgate handle |
Part Number - 113475 will protect the tailgate handle on your truck if you have the locking handle on the gate. (2004 and newer only.) This model is discontinued. |
Package Contents:
 Kit PN 113400 ^ (Keypad on drivers door, no lock on passenger door) |
 Kit PN 113450 ^ (Lock on each front door) Discontinued Model. |
|---|---|
 Kit PN 113470 ^ (For rear two doors) |
 Kit PN 113451 ^ (No keypad, lock on drivers door only) |
|
Sorry, each PN listed below is discontinued.
| PN 113400 | PN 113450 | PN 113451 |
Ford F-150 pickup truck, This kit also fits Ford Raptor, 2010 - 14. Does not fit 2015 and newer vehicles. See photos below. |
Ford F-150 pickup truck, Does not fit 2015 and newer vehicles. See photo below. Sorry, this part number is discontinued. |
Ford F-150 pickup truck, Does not fit 2015 and newer vehicles.
|
PN 113470 Ford F-150 pickup truck, rear two doors. Does not fit 2015 and newer vehicles. . |
PN 113400 if your drivers door handle looks like this. (Trucks with keypad.) |
 PN 113450 OR 113451 if your drivers door handle looks like this. (Trucks without keyless entry.) |
| Model selection | All products | Where to buy | Installation |
|---|
|
|---|
